oak corner cabinet reptile cage (waukesha)

Check Out DZCUSTOMCAGESANDCREATURES on facebook for more projects and pictures.
Converted from an oak corner entertainment center/armoire.
$800 Specs: Inside cage dimensions: 48"wide x 24" deep x 40" high (back side walls 29" wide, back wall 7" wide) Outside dimensions: 51"w x 28"d x 61" t (back sides 32.
25"w) Top door dimensions: 35"w x 38"t Bottom door dimensions: 35"w x 14"t 2 four inch computer fans for ventilation with protective mesh and grate so your animal cant get through.
2 pivoting light sockets rated up to 300w surrounded by protective cages with hinged doors (during pictures I had one 120w powersun and a 60w led house bulb in) 6 plug power supply with 2 USB ports 1/4 inch glass doors on an aluminum track with 6 inch aluminum handles and door lock.
Inside wood was sealed with UV protective Deck sealer.
Then the entire bottom, 5 inches up the sides and 22 inches up the back are all covered in waterproof poly liner with the edges/corners sealed with aquarium safe silicone.
The water section has extra plexi glass lining the whole area, the front 5 inch divider however is made of 3 pieces of glass siliconed together.
Also has a built in water pump and filter box There is a built in drain with ball valve mounted underneath for easy water changes/cleaning.
I tested the water area extensively for two months to make sure there were no leaks.
The background is made of foam sheets cut to size and shape, glued in along with spray foam.
it was then covered in colored mortar, and sealed with water based concrete sealer.
Vines made with strips of Burlap, silicone and eco-earth.